Home > AR-9 > UPPER PARTS > FOREGRIPS
Sort By:
Page of 1
BCM GUNFIGHTER MOD3 VERTICAL KEYMOD FOREGRIP BLACK


Direct Attach to KeyMod™ Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod™ Vertical Grip
  • Push tool into the screw to extend the KeyMod™ anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod™ slots. Grip can be installed in your desired orientation, angled forward or back.
  • After the anchor is inserted, slide the BCM® Vertical Grip forward until it travels no further.
  • Push the BCM Vertical Grip against rail, engaging the accessory’s recoil lugs to the intersecting KeyMod™ opening.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

Our Price: $24.99
BCM GUNFIGHTER MOD3 VERTICAL KEYMOD FOREGRIP FDE


Direct Attach to KeyMod™ Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM® KeyMod™ Vertical Grip
  • Push tool into the screw to extend the KeyMod™ anchor, making it protrude from the top.
  • Align the anchors in the two selected large holes of the desired KeyMod™ slots. Grip can be installed in your desired orientation, angled forward or back.
  • After the anchor is inserted, slide the BCM® Vertical Grip forward until it travels no further.
  • Push the BCM Vertical Grip against rail, engaging the accessory’s recoil lugs to the intersecting KeyMod™ opening.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

Our Price: $24.99
BCM GUNFIGHTER MOD3 VERTICAL PICATINNY FOREGRIP BLACK


Direct Attach Picatinny 1913 Rail Version

  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.
  • Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

Tools needed: T15 Torx Driver (not supplied)

  • Insert tool (T15 Torx™ driver) into the screw from under the BCM 1913 Vertical Grip
  • Push tool into the screw to extend the Picatinny anchor, making it protrude from the top.
  • With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.
  • Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip’s recoil lug to the intersecting Picatinny rail grooves.
  • With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 40 Inch-lbs. plus quarter turn).
  • Ensure there is no wiggle or forward/backward movement once tight.

Our Price: $24.99
MAGPUL MOE RVG FOREGRIP BLACK

Designed for use with milspec 1913 Picatinny rail hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul Dynamics. Includes a custom fitted universal mounting rail and all mounting hardware. Made in U.S.A.

Our Price: $24.99
MAGPUL MOE RVG FOREGRIP FDE

Designed for use with milspec 1913 Picatinny rail hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting as taught by Magpul Dynamics. Includes a custom fitted universal mounting rail and all mounting hardware. Made in U.S.A.

Our Price: $24.99
TANGO DOWN STUBBY KEYMOD VERTICAL FOREGRIP FDE


Developed specifically for all KEYMOD handguards, the BGV-KM1 Vertical Grip is the perfect fore grip for your lightweight rifle or carbine. Its short grip length is ideal for CQC, and featherweight injection molded shape is comfortable to the hand, hour after hour. The BGV-KM1 takes full advantage of all the KEYMOD design features, such as strength, light weight and simplicity.

The BGV-MK1 features a rugged, cast stainless steel KEYMOD interface anchor that securely mounts to any KEYMOD weapon handguard. Just loosen the Allen head fastener inside the grip housing, locate and slide the grip into your desired KEYMOD address and tighten.

The KEYMOD anchor, combined with our premium impact and heat modified polymer, guarantees this grip will survive any abuse you can give it.

Our Price: $29.99
TANGO DOWN STUBBY KEYMOD VERTICAL FOREGRIP BLACK


Developed specifically for all KEYMOD handguards, the BGV-KM1 Vertical Grip is the perfect fore grip for your lightweight rifle or carbine. Its short grip length is ideal for CQC, and featherweight injection molded shape is comfortable to the hand, hour after hour. The BGV-KM1 takes full advantage of all the KEYMOD design features, such as strength, light weight and simplicity.

The BGV-MK1 features a rugged, cast stainless steel KEYMOD interface anchor that securely mounts to any KEYMOD weapon handguard. Just loosen the Allen head fastener inside the grip housing, locate and slide the grip into your desired KEYMOD address and tighten.

The KEYMOD anchor, combined with our premium impact and heat modified polymer, guarantees this grip will survive any abuse you can give it.

Our Price: $29.99
BCM GUNFIGHTER SHORT VERTICAL KEYMOD FOREGRIP BLACK


Quick Detachable KeyMod™ Version

  • Quick detachable, Patent Pending, Tool-less, Direct Mount KeyMod™ interface.
  • Low-profile length for increased mobility and decreased “snag” factor.
  • The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
  • Can be mounted in reverse angle to increase control when grabbing handguard and grip.
  • Flat sides give better yaw control during firing and non-firing manipulations.
  • Aggressive texture.
  • Storage inside the grip.
  • Requires three KeyMod™ attachment hole mounting points.
  • Spring-loaded clamps makes installation and removal easier.
  • Made in the U.S.A., manufactured from high quality, impact resistant polymers.

Installation Instructions

  • To unlock, force the serrated slide-latch upward, until it clears the lower portion of the grip body.
  • After it clears, rotate the lower grip body, counter-clockwise, a minimum of two rotations.
  • Install the grip forward, into the chosen KeyMod™ interface location and with the desired grip angle direction, until the grip travels no further
  • Twist the lower grip section clockwise until the serrated slide-latch drops into the locked position.
  • Ensure the grip is firmly locked into the KeyMod™ interface.

Our Price: $34.99
MAGPUL AFG1 ANGLED FOREGRIP BLACK


Unlike conventional vertical fore-grips, the Magpul AFG1 (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, the AFG1 helps mitigate recoil and control the weapon, facilitating faster, more accurate follow-up shots. Made in U.S.A.

Our Price: $34.99
MAGPUL AFG1 ANGLED FOREGRIP FDE


Unlike conventional vertical fore-grips, the Magpul AFG1 (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, the AFG1 helps mitigate recoil and control the weapon, facilitating faster, more accurate follow-up shots. Made in U.S.A.

Our Price: $34.99