Home > AR-308 > UPPER PARTS > RAIL ACCESSORIES
Sort By:
Page of 1
2" REMOVABLE KEYMOD ACCESSORY RAIL

  • T6 Aluminum
  • Foregrips,Bipods Flashlights etc..
  • AR15 / AR10
  • Anodized Finish
  • 2 inch Length
  • Keymod Design

Our Price: $12.99
Sale Price: $5.99
Savings: $7.00
3" REMOVABLE KEYMOD ACCESSORY RAIL

  • T6 Aluminum
  • Foregrips,Bipods Flashlights etc..
  • AR15 / AR10
  • Anodized Finish
  • 3 inch Length
  • Keymod Design

Our Price: $14.99
Sale Price: $5.99
Savings: $9.00
5" REMOVABLE KEYMOD ACCESSORY RAIL

  • T6 Aluminum
  • Foregrips,Bipods Flashlights etc..
  • AR15 / AR10
  • Anodized Finish
  • 5 inch Length
  • Keymod Design

Our Price: $16.99
Sale Price: $5.99
Savings: $11.00
MAGPUL MOE POLYMER RAIL SECTION


Designed for use with MOE Hand Guards and most standard plastic hand guards, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to integral mounting slots on MOE Hand Guards is included. Choose 5, 7, 9, or 11 slots.

Our Price: $5.99
BIPOD ADAPTER FOR PICATINNY RAIL

  • Fits Sling Stud Mounting Bipods
  • Enables Bipod To Be Mounted To Picatinny/ Weaver Rails
  • T6 Aluminum
  • Philips Head Screw
  • Heavy Duty
  • Also Allows Mounting Of A Sling Swivel To A Rail System

Our Price: $19.99
Sale Price: $8.99
Savings: $11.00
AR-15 LOW PROFILE SCOPE MOUNT FOR CARRY HANDLE


  • T6 Aluminum
  • Low Profile Design
  • See Thru Capability
  • Lightweight

Our Price: $19.99
Sale Price: $9.99
Savings: $10.00
GUNTECH FLASHLIGHT MOUNT / LASER 1" OFFSET MOUNT


  • 45 Degree
  • 1" Diameter
  • QD Knob
  • T6 Aluminum

Our Price: $9.99
GUNTECH 45 DEGREE 3 SLOT ANGLE MOUNT


  • 45 Degree
  • 3 Slot Picatinny Rail
  • One Allen Head Screw
  • T6 Aluminum
  • Lightweight

Our Price: $9.99
GUNTECH FIXED SLING SWIVEL FOR PICATINNY RAIL


  • T6 Aluminum Picatinny Rail Mount
  • Steel Swivel
  • Mount Bolts Directly To Any Picatinny Rail
  • 1.25" Swivel

Our Price: $19.99
Sale Price: $9.99
Savings: $10.00
BCM KEYMOD NYLON RAIL SECTION BLACK


Features:

  • Rail section is made of Lightweight Impact Resistant Polymer.
  • Mounting hardware is made of Corrosion Resistant Stainless Steel
  • Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
  • Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
  • Features a Snag resistant design, while retaining Mil-Standards specs.
  • Self-contained assembly, eliminates the possible loss of mounting hardware.
  • Fits ALL KeyMod interface mounting surfaces.

Our Price: $10.99
BCM KEYMOD NYLON RAIL SECTION FDE


Features:

  • Rail section is made of Lightweight Impact Resistant Polymer.
  • Mounting hardware is made of Corrosion Resistant Stainless Steel
  • Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.
  • Available is three Lengths: 3-inch (5 slot), 4-inch (7 slot) and 5.5-inch (11 slot)
  • Features a Snag resistant design, while retaining Mil-Standards specs.
  • Self-contained assembly, eliminates the possible loss of mounting hardware.
  • Fits ALL KeyMod interface mounting surfaces.

Our Price: $10.99
MAGPUL M-LOK POLYMER RAIL SECTIONS


Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

Overall Length
3 Slot 1.6 in
5 Slot 2.5 in
7 Slot 3.3 in
9 Slot 4.1 in
11 Slot 4.9 in

*M-LOK accessories will not fit into the MOE slots without modification. MOE accessories, however, will work on an M-LOK slot with a small adapter plate.*

Our Price: $10.99
GUNTECH 45 DEGREE 4 SLOT ANGLE MOUNT


  • 45 Degree
  • 4 Slot Picatinny Rail
  • One Allen Head Screw
  • T6 Aluminum
  • Lightweight

Our Price: $10.99
AR15 FRONT SIGHT POST RAIL MOUNT


  • T6 Aluminum
  • Bolts On Fixed Front Sight Post
  • Two Picatinny Rails For Lights, Lasers, etc.
  • Lightweight

Our Price: $10.99
MAGPUL LADDER RAIL


Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provide a rubbery surface for improved weapon control and rail protection.

  • Each panel will cover an entire side of a carbine rail system.
  • They are easily trimmed to shorter lengths using a razor blade or exacto knife
Made in U.S.A.!!

Our Price: $12.99
BCM GUNFIGHTER 5 PACK 5" KEYMOD RAIL PANEL PACK

Features:
• Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod Slots.
• Ultra-slim and radiused surface to allows a “round” handguard feeling, from an Octagonal profile.
• Aggressive Non-Slip or Non-Reflective surface.
• Ventilated for cooling.
• Available in the popular colors of Black, Flat Dark Earth, Wolf Gray and Foliage Green
• Bi-directional. Locking tabs on either end, depending which direction they are installed.
• Measurements: Length 5.550”, Width 0.625 ”, Thickness 0.100”
• Can be cut to any length, depending on users requirements.
• Made in the U.S.A. of a high-strength polymer material.
• Each Kit contains Five (5) matching color KeyMod Panel Strips.

Our Price: $16.99
Sale Price: $14.99
Savings: $2.00
GUNTECH QD SLING SWIVEL FOR PICATINNY RAIL


  • Steel QD Push Button Swivel
  • T6 Aluminum Picatinny Rail Mount
  • Mount Bolts Directly To Any Picatinny Rail and Allows User To Remove QD Swivel
  • 360 Degree Rotating Swivel

Our Price: $19.99
Sale Price: $14.99
Savings: $5.00
MAGPUL M-LOK ALUMINUM RAIL SECTIONS


Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.
Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

3 Slots, max overall length of 1.6"
5 Slots, max overall length of 2.5"
7 Slots, max overall length of 3.3"
9 Slots, max overall length of 4.1"


*M-LOK accessories will not fit into the MOE slots without modification. MOE accessories, however, will work on an M-LOK slot with a small adapter plate.*

Our Price: $18.99
VLTOR QD KEYMOD SLING MOUNT


VLTOR KeyMod QD Rotational Sling Mount

  • Utilizes 3 KeyMod holes
  • Compatible with all standard KeyMod mounting systems
  • Free Rotation
  • Accepts all standard sling swivels (sold separately)
  • Comes assembled with all hardware and installation tool
  • Aircraft grade aluminum construction
  • Milspec Hard Coat Anodize Black


Our Price: $19.99
ERGO 4 PACK MLOK WEDGELOK SLOT COVER GRIPS


Features:
• Santoprene Construction/Heat Resistant
• Positive non-slip gripping surface
• Low profile with aggressive texture
• 6 1/4" long and 5/8" wide • Covers 4 MLOK slots
• For WedgeLok Rails

Our Price: $21.99
ERGO 4 PACK KEYMOD WEDGELOK SLOT COVER GRIPS


Features:
• Santoprene Construction/Heat Resistant
• Positive non-slip gripping surface
• Low profile with aggressive texture
• 6 1/4" long and 5/8" wide • Covers 4 Keymod slots
• For Keymod Rails

Our Price: $21.99
ODIN WORKS 5 SLOT KMOD ACCESSORY RAIL

The Odin Works KMod accessory rail allows you to mount sights, lights, and other tactical accessories to your free float KMod forend.

   KMod is made to VLTOR WEAPONS SYSTEMS KeyMod specifications (universal).
   Includes KeyMod nuts, screws, and hex wrench.
   Weight: 0.8 oz (including KeyMod nuts and screws).
   2 5/16" long.
   Accessory Rail can be placed at 3,6, and 9 o'clock positions and can be joined to create continuous Pic Spec Rail.
   Made from 6061-T6 Billet Aluminum.

Our Price: $22.99
GUNTECH AR15 REMOVABLE CARRY HANDLE


  • T6 Aluminum
  • Steel QD Knobs
  • Mil-Spec
  • Matte Finish

Our Price: $39.99
Sale Price: $29.99
Savings: $10.00
GUNTECH AR15 REMOVABLE CARRY HANDLE W/REMOVABLE PICATINNY RAIL SCOPE MOUNT


  • T6 Aluminum
  • Steel QD Knobs
  • Mil-Spec
  • Matte Finish
  • Removable Picatinny Rail See Thru Scope Mount Included

Our Price: $49.99
Sale Price: $39.99
Savings: $10.00